| Manual valves |
|
3/2 and 5/3-way Ports M5 (10-32 UNF) Cartridge ø 4 mm (5/32“ O.D.) The manually operated console valves come standard with a 22 mm diameter mounting aperture which consists of our own valves combined with manual devices. This feature means that all the manual devices, 22 in diameter, can be used. This series of miniature valves has been specially designed to satisfy all the application requirements of the controls industry, with particular attention being paid to the operating characteristics which are required from these components:
Note: Several additional push buttons, switches, lighted operators and electrical controls are available which integrate into this product line. Contact factory for details, lead time and part number codes.  View Series 2; Manually Operated Console Minivalves PDF catalog
Handle with incorporated micro valve 3-way/2-position Normally Closed Mod. 234-885 Handle with incorporated micro switch Mod. 234-88E Manual handle with integrated pneumatic micro valve 3/2 or with an electrical micro switch with single pole changeover contacts. Rugged construction particularly suited to be incorporated in to other equipment, such as manual lifting systems, manual vacuum systems, locking and clamping systems. Note: Handles can support a load of 330 lbf combined total when assembled with 2, M5 x 0.8 BOLTS x 10mm long. (Maximum bolt torque is 7 ft-lbs). View Mini-handle valve PDF catalogView technical data PDF catalog
3-way/2-position, 5-way/2-position and 5-way/3-position Mod. 234-885 Ports 1/8” NPTF The Series 1 manual valves (1/8”, 3-way/2-position and 5-way/2-position) and the Series 3 manual valves (1/8”, 3-way/2-position, 5-way/2-position and 5-way/3-position) are available with actuators designed to satisfy different needs. For series 3, the 3-way/2-position valves are normally closed when P is the inlet; they can also be normally open when R is the inlet. They can be operated with vacuum down to -.9 bar (28" Hg). Additionally, the series 3 valves can be supplied with 2 different pressures into ports 3 and 5 if a cylinder requires different extend and retract forces. The series 1 valves offer a more rugged, compact design with steel operator interfaces. View Series 1 and 3; 1/8" Ported Manually Operated Valves PDF catalogView technical data PDF catalog
3-way/2-position, 5-way/2-position and 5-way/3-position Ports 1/4” NPTF The Series 1 manual valves (1/4”, 3-way/2-position and 5-way/2-position) and the Series 4 manual valves (1/4”, 3-way/2-position, 5-way/2-position and 5-way/3-position) are available with actuators designed to satisfy different needs. For Series 4, the the 3-way/2-position valves are normally closed when P is the inlet; they can also be normally open when R is the inlet. They can be operated with vacuum down to -.9 bar (28" Hg). Additionally, the series 4 valves can be supplied with 2 different pressures into ports 3 and 5 if a cylinder requires different extend and retract forces. The series 1 valves offer a more rugged, compact design with steel operator interfaces. View Series 1 and 4; 1/4" Ported ManuallyOperated Valves PDF catalog View technical data PDF catalog
Foot Pedal - Pneumatic 10-32 UNF, 5/32" OD: 3-way/2-position (Series 2) 10-1/4” NPTF, 5-way/2-position (Series 3) Foot Pedal - Electrical with Normally Closed/Normally Open contacts Series 2 Foot Pedal 10-32 UNF, 5/32” OD, 3-way/2-position Normally Closed The pedals can be supplied either in the pneumatically-operated or in the electrically-operated version. The pneumatically-operated type is available with a 5-way/2-position valve and 1/4” front ports which allow the fittings and silencers to be assembled more easily. A 3-way/2-position version can be obtained by simply plugging one of the two outlet ports, (2 or 4). The electrically-operated type is available with a deviation single-pole contact micro-switch and a front wire outlet (PG9). The pedal can be operated as spring return or Detented, by switching the selector placed under the small red door as shown on the drawing (x). View Foot pedal PDF catalogView technical data PDF catalog
Series VMS, 3-way/2-position Ports M5, 1/8”, 1/4”, 3/8”, 1/2”, 3/4" NPTF The VMS series slide valves are commonly used upstream of FRL units to ease repair and replacement. They can also be used in situations requiring the exhausting of all downstream air. This would assist in maintenance applications where ball valves may be too large and bulky to maneuver in tight assembly spaces. The exhausting of downstream air while simultaneously blocking inlet flow helps in building component groups to be tested in stages, and assembled later onto the main body of a machine. View Foot pedal PDF catalog
Ports 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”,1 1/2”, 2”, 2 1/2”, 3”, 4”, NPTF Nickel-Plated (2940), Chrome-Plated (2930N) andPlain Brass (2930 and 2960) Electroless nickel-plated: this plating offers excellent corrosion resistance, and is an FDAapproved material, making the Camozzi ball valve suitable for food packaging, chemical processing, medical, dental, water treatment, and printing markets, in addition to standard application. View Ball Valves PDF catalog |
