| Air pilot valves |
|
Cartridge Ø 4 mm (5/32” O.D. tube connection) These basic pneumatic logic valves provide a range of functions including “AND”, “NOT”, “OR”, “YES” and “Memory”. Materials:
Basic logic functions Series 2L are available in 5 different models and can be mounted separately by means of 2 passing holes in the body. Bracket Mod. 2LQ-8A allows to have the inlets and outlets on the front side, facilitating the mounting of the connection tubes. All models are constructed with the pressure window incorporated, which allows an easy detection of any problems. Moreover the fittings are incorporated into the valve body and are super-rapid ø4. The “NOT” element has an actuating pressure of 0.3 bar.  View Basic Logic Valves Series 2L PDF catalog
Mod. 2LB-SE (Sender) Mod. 2LB-SR (Receiver) Both the sender and receiver should be supplied with filtered, non-lubricated compressed air. The sender requires a supply pressure of 0.3 - 2 bar. In the case of the receiver (max 8.7 psi), this is done in order to prevent the danger of contamination. The air jet from the sender interrupts the free outflow of the air jet at the receiver. A back pressure is produced which generates a control pressure at outlet A of the receiver. This pressure signal is typically sent to an amplifier valve. If an object breaks the air jet between the sender and the receiver, the signal drops to zero. The air signal from the receiver element (2LBSR) will typically become the input pilot signal to the amplifier valve (2LA-AM). Receiver element (2LB-SR) will typically connect its port 2 (or “A”), to the amplifier valve pilot port 12. View Sender and Receiver Element Series 2L PDF catalog
Mod. 2LA-AM (Amplifier Valve) 3-way/2-position Ports 1/8” BSPP *(Will accept Pro-Fit® fittings) The pneumatically operated amplifier valve is a 3-way/2-position normally closed valve, changing low pressure signals into 2 - 8 bar pressure signals. The valve construction allows permanent reduced air consumption at rest. Pilot pressure applied at Port 12 actuates valve and allows pressure (2 - 8 bar) to flow from inlet P to outlet A). 1 → 2. A constant “leak,” or air consumption, occurs while unit is at rest from inlet 1 to atmosphere. View Series 2L Pneumatically Operated Amplifier Valve PDF catalog
1/8” NPTF, 3-way/2-position & 5-way/2-position 1/4” NPTF, 3-way/2-position, 5-way/2-position, 5-way/3-position,and dual 3-way/2-position valves. The pneumatically operated,3-way/2-position, 5-way/2-position Series 3 valves have been designed with different methods of return: An Air-Pilot with mechanical spring, Air-Pilot return, or Air-Pilot with bias override return. This is possible due to the type of design consisting of a balanced spool, which means that it can be used for a very wide range of applications. (including reverse porting). The 3-way/2-position valves are normally closed in the rest position when the pressure is supplied at P, and are normally open when the pressure is supplied at R, the use of A remaining unchanged. Moreover, the 5-way/2- position valves can be supplied via the ports R and S with two different pressures if a cylinder must be operated using a delivery pressure different from the return pressure. On the valve series 3, two additional holes permit assembly onto the manifold CNVL without the use of a banjo bolt. *See manifold codes at the end of this section. New versions of this valve have expanded the range to higher flow 1/4” ported valves as well as dual 3-way/2-position valves. 1/8” and 1/4” valves can be mounted on a common manifold by means of a transition plate. View Series 3 Air-Pilot Operated Valve PDF catalog View technical-data PDF catalog View Manifold Segments for Series 3 PDF catalog
1/8”, 1/4” NPTF, 3-way/2-position 5-way/2-position; 5-way/3-position 1/2” NPTF 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position Series 4 valves have been designed with different methods of return: an Air-Pilot with mechanical spring, Air-Pilot return, or Air-Pilot with bias return. This is possible due to the type of design consisting of a balanced spool, which means that it can be used for a very wide range of applications. (including reverse porting) The 3-way/2-position valves are normally closed in the rest position when the pressure is supplied at P, and are normally open when the pressure is supplied at R, the use of A remaining unchanged. Moreover, the 5-way/2-position valves can be supplied via the ports R and S with two different pressures if a cylinder must be operated using a delivery pressure different from the return pressure. On the Series 4 valves, two additional holes permit assembly onto the manifold CNVL without the use of a banjo bolt. * See pages at end of sections for manifold options. Key - Series 4 valves incorporate a double lip (Z) seal against the spool. This seal design has improved wear and sealing properties against the spool and spacer glands for when the fluid media is less than optimal. View Series 4 Air-Pilot operated valves PDF catalog View technical-data PDF catalog View Manifold Segments for Series 4 PDF catalog
(VDMA 24563) ISO 15407-1, Size 26mm (size 01) and 18mm (size 02) Side outlet manifold, Manifold assembly (non-plug-in) 5-way/2-position and 5-way/3-position The Series 7 electropneumatically and pneumatically operated valves have been designed to comply with ISO 15407-1 (VDMA 24563) standards size 26mm (VDMA 01) and size 18mm (VDMA 02). The electropneumatically operated valves have the following types of operation available:
View Series 7 Solenoid and Air-Pilot Operated Valves PDF catalog View technical-data PDF catalog View Manifold Series 7 Solenoid and Air-Pilot Operated Valves PDF catalog
Series 7 - VDMA 24563 (ISO 15407-1) Regulator Plate ISO Size 01 (P-regulation) 26mm For 26mm-ISO 01 size valves only View Regulator Plate ISO Size 01 (P-regulation) PDF catalog
Series 7 - VDMA 24563 (ISO 15407-1) Regulator Plate ISO Size 01 (AB-regulation) 26mm For 26mm-ISO 01 size valves only View Regulator Plate ISO Size 01 (AB-regulation) PDF catalog
Assembly with sub-base (ISO 5599/1 Standards) non-plug-in Sizes 1, 2 and 3: 5-way/2-position; 5-way/3-position; single & double Air-Pilot valves The Series 9 Air-Pilot operated valves have been manufactured in the sizes 1, 2 and 3, as recommended by the ISO Standards. Three different types of sub-base are available:
The Series 9 solenoid valves are also constructed so as to be actuated in different ways:
View Series 9 Air-Pilot Operated Valves PDF catalog View technical-data PDF catalog View Manifold Series 9 Air-Pilot Operated Valves PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 1 (P-regulation) For ISO Size 1 valves only View ISO 5599/1 (P-regulation) Size 1 PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 1 (AB-regulation) For ISO Size 1 valves only View ISO 5599/1 (AB-regulation) Size 1 PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 2 (P-regulation) For ISO Size 2 valves only View ISO 5599/1 (P-regulation) Size 2 PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 2 (AB-regulation) For ISO Size 2 valves only View ISO 5599/1 (AB-regulation) Size 2 PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 3 (P-regulation) For ISO Size 3 valves only View ISO 5599/1 (P-regulation) Size 3 PDF catalog
Series 9 - ISO 5599/1 Regulator Plate ISO Size 3 (AB-regulation) For ISO Size 3 valves only View ISO 5599/1 (AB-regulation) Size 3 PDF catalog
Air-Pilot operated 1/4” NPTF 3-way/2-position; 5-way/2-position; and 5-way/3-position valves with Interface according NAMUR Standard The valves Series NA are available in versions: 5-way/2-position and 3-way/2 position, Normally Closed or Normally Open. These are indirectly actuated valves and are available in single and double air pilot versions. The valve has a NAMUR interface pattern and can therefore be directly mounted on other suitable components that also have this hole pattern, such as certain rotary actuators ball valves or process valves. The single air pilot version is equipped with a mechanical return spring. View Series NA Valves (NAMUR Interface) PDF catalog View technical-data PDF catalog
Check Valves VNR Ports M5 (10-32 UNF), 1/8”, 1/4” View Series VNR Check Valves PDF catalog View technical-data PDF catalog
Unidirectional (Pilot-Operated Check Valve) and Bidirectional (Blocking Valve) 1/8”, 1/4”, 3/8”, 1/2” NPTF Nominal diameters 5.5 - 8 - 11 mm These valves have been designed to mount directly into the cylinder ports. The inner design of the blocking valves Series VBO and VBU allows a very high flow rate and reliable operation. View Series VBO - VBU (Nickel Plated) PDF catalog View technical-data PDF catalog
Quick exhaust valves VSC, VSO Ports M5 (10-32 UNF), 1/8”, 1/4”, 3/8”, 1/2”, NPTF cartridge ø 4 mm (5/32” O.D.) (VSO only) View Series VSC and VSO PDF catalog View technical-data PDF catalog |
