| Flow Control Valves & Accessories - BSP/METRIC |
|
Check valves VN R Quick exhaust valves VSC - VSO Shuttle valve SCS Ports M5, G1/8, G1/4, G1/2 Cartridge ø4 mm Automatic valves are defined as those valves which change their state simply as a result of compressed air being present or absent at their inlets.  View Check & Quick Exhaust ValvesSeries SCS, VNR, VSC and VSO - BSP/METRIC PDF catalog
Unidirectional (Pilot-operated check) and bidirectional (blocking valve) G1/8, G1/4, G3/8 Nominal diameters 5.5 - 8 - 11 mm These valves have been designed in order to enable mounting directly on cylinders. The inner design of the blocking valves Series VBO and VBU allows a very high flow rate and reliable operation. View Pilot-Operated Check/Blocking ValvesSeries VBO - VBU - BSP/METRIC PDF catalog
Flow Control Valves Composite Flow Control Valves with Banjo Unidirectional and Bidirectional (Meter-out, Meter-in, Needle Orifice) Ports G1/8, G1/4, G3/8 with metric mm O.D. tube connections These unidirectional and bidirectional flow control valves are supplied complete with banjo and O-ring thread seal. View Composite Flow Control Valves with BanjoSeries PSCU - PMCU - PSVU - PMVU - PSCO - PMCO PDF catalog
Meter In, Meter Out, Needle Orifice G1/8, G1/4, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2 - 3.8 - 5.8 - 8 mm . The Meter In, Meter Out, Needle Orifice flow controllers, series TMCU, TMVU , TMCO have been designed to offer a solution with reduced overall dimensions in combination with higher flow rate characteristics. Their construction allows an easy assembly on cylinders and valves and offers the possibility of locking the regulation screw once it has been set. The flow regulation range which is extremely wide and gradual has been optimized further, allowing a very accurate flow regulation over the whole scale. View Composite Right Angle Flow Control ValvesSeries TMCU-TMVU-TMCO- BSP/METRIC PDF catalog
Unidirectional and bidirectional banjo flow controllers Ports M5, G1/8, G1/4, G3/8, G1/2 These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube. Only the G1/2 model is supplied complete with banjo flow controllers. For the other models the banjo fitting is to be requested separately. View Right Angle Flow Control Valves - BSP/MetricSeries SCU, MCU, SVU, MVU, SCO, MCO PDF catalog
Swivel Design Meter-in, Meter-Out, Needle Orifice M5, G1/8 and G1/4 banjo flow controllers Nominal diameters dia. 1.5 - 3.5 and 5 mm These unidirectional and bidirectional flow controllers have been designed as small as possible to enable mounting directly on valves or cylinders. The flow regulation range is wide and gradual, allowing the regulation to be very accurate either at minimum or maximum flow. View Right Angle Flow Control Valves - BSP/MetricSeries GSCU-GMCU-GSVU GMVU-GSCO-GMCO PDF catalog
Panel or wall-mounted flow controllers Unidirectional RFU and bidirectional RFO Ports M5, G1/8, G1/4 Nominal diameter: M5 = 1.5 mm (10-32 UN F) G1/8 = 2 and 3mm G1/4 = 4 and 6mm The undirectional flow controllers are equipped with M5, G1/8 and G1/4 ports, each of which is available with two different types of adjustment (see diagrams). They are used mainly for controlling the speed of cylinders. They may be mounted on control panels or cylinders, as required. Bidirectional controllers are also available with the same bodies, but suitably modified. View In-line Flow Control Valves Series RFU - RFO BSP/METRIC PDF catalog
BSP/Metric — Needle valve Series 28 These are bidirectional control valves made entirely of nickel-plated brass OT58 (brass), with Buna-N seals and a plastic control knob. They are suitable for regulating compressed air, water or mineral oil. View Needle Valve Series 28 - BSP/Metric PDF catalog |
Check & Quick Exhaust Valves
Pilot-Operated Check/Blocking Valves Series VBO - VBU - BSP/METRIC
Composite Flow Control Valves with Banjo
Composite Right Angle Flow Control Valves
Right Angle Flow Control Valves - BSP/Metric
Right Angle Flow Control Valves - BSP/Metric
In-line Flow Control Valves Series RFU - RFO BSP/METRIC
Right Angle Flow Control Valves - BSP/Metric
