| Flow control valves - NPTF |
|
Check valves VNR Quick exhaust valves VSC , VSO Ports M5 [10-32 UNF], 1/8”, 1/4”, 3/8”, 1/2”, NPTF cartridge ø 4 mm [5/32” O.D.]  View Series VNR, VSC and VSO PDF catalog
Unidirectional (pilot-operated check valve) and bidirectional (blocking valve) 1/8”, 1/4”, 3/8”, 1/2” NPTF Nominal diameters 5.5 - 8 - 11 mm These valves have been designed to mount directly into the cylinder ports. The inner design of the blocking valves Series VBO and VBU allows a very high flow rate and reliable operation. View Series VBO - VBU (Nickel Plated) PDF catalog
Meter In, Meter Out, Needle Orifice 1/8”, 1/4”, 3/8”, 1/2” NPTF Tube OD 5/32”, 1/4”, 5/16”, 3/8”, 1/2” Reusable thread seal, PTFE seal ring (Teflon®) - Pro-Fit® The Meter In, Meter Out, Needle Orifice flow controllers, series TMCU, TMVU, TMCO have been designed to offer a solution with reduced overall dimensions in combination with higher flow rate characteristics. Their construction allows an easy assembly on cylinders and valves and offers the possibility of locking the regulation screw once it has been set. The flow regulation range which is extremely wide and gradual has been optimized further, allowing a very accurate flow regulation over the whole scale. For Pro-Fit® Torque Specifications, see Page 6. View Series TMCU – TMVU – TMCO PDF catalog
Meter-In, Meter-Out, Needle Orifice banjo flow controllers Series GMCU-MCU, GSC U-SC U, GSV U-SV U, MVU, SCO , MCO Ports M5 [10-32 UNF], 1/8”, 1/4”, 3/8”, 1/2” NPTF These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The GMCU’s and GSC U’s feature Camozzi’s new swivel design. This new design features a fully rotatable swivel design and is constructed with a lower profile. The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube. View Series GMCU - MCU, GSCU - SCU, GSVU - SVU, MVU, SCO, MCO PDF catalog
Panel or wall-mounted flow controllers In-line/Unidirectional, RFU Ports M5 [10-32 UNF], 1/8”, 1/4” NPTF The undirectional flow controllers are equipped with M5 [10-32 UNF], 1/8” and 1/4” ports, each of which is available with two different types of adjustment (see diagrams). They are used mainly for controlling the speed of cylinders. They may be mounted on control panels or cylinders, as required. View Series RFU PDF catalog
Ports 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 4”, NPTF Nickel-Plated (2940), Chrome-Plated (2930N) and Plain Brass (2930 and 2960) Electroless nickel-plated: this plating offers excellent corrosion resistance, and is an FDAapproved material, making the Camozzi ball valve suitable for food packaging, chemical processing, medical, dental, water treatment, and printing markets, in addition to standard application. View Series 2930, 2930N, 2940, 2960 PDF catalog |
