Single and double–acting (magnetic) (DIN/ISO 6431)
Bore: ø 32, 40, 50, 63, 80, 100,125 cushioned
[1 1/4”, 1 9/16”, 2”, 2 1/2”,
3 1/8”, 4”, 5” inch approximations]

The Series 60 cylinders with diameters 32, 40, 50, 63, 80, 100 and 125 have been designed to comply with the dimensions laid down in the DIN/ISO 6431 standards. A removeable magnet is mounted on the piston in these cylinders.
This cylinders series is normally equipped with adjustable end–stroke cushioning.
Moreover these cylinders are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke.
These cylinders can also accommodate stroke lengths up to 1000 mm for bore sizes shown in the table.

View Cylinder Series 60 PDF catalog

Single, double–acting, magnetic (DIN/ISO 6431)
Bore: ø 32, 40, 50, 63, 80, 100, 125 cushioned
[1 1/4”, 1 9/16”, 2”, 2 1/2”,
3 1/8”, 4”, 5” inch approximations]

The Series 61 cylinders with diameters 32, 40, 50, 63, 80, 100 and 125 have been designed to comply with the dimensions laid down in the DIN/ISO 6431 standards. The extruded aluminum tube with improved aesthetics, has two grooves (on three sides) where the proximity switch Mod. CST can be directly mounted. This enables the same cylinder dimensions to be retained. Four tie–rods located inside of the tube make the mounting of the end–blocks extremely secure.
This cylinder series is equipped with adjustable end–stroke cushioning. Moreover, these cylinders are also equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke (only until ø100).
The cylinder series can also accommodate stroke lengths up to 1000 mm for bore sizes shown in the table.

View Cylinder Series 61 PDF catalog