Rotary Actuators & Grippers


Rotary Cylinders Series 30
Rotary Cylinders Series 30

The rotary cylinders Series 30 are made of a special Aluminium profile. Their compact dimensions and clean lines give a good aesthetic appearance. A unique wear resistant guide block gives increased service life to the unit.

Rotary Cylinders Series 69
Rotary Cylinders Series 69

The rotary cylinders of the 69 Series are available in 7 different bores (from 32 to 125 mm) and can satisfy a large range of operational requirements. As a result of their design and the materials used, these cylinders can be used in extreme conditions with optimum results.

Quarter-Turn Valve Actuators Series ARP
Quarter-Turn Valve Actuators Series ARP

The rotary actuators Series ARP has been designed to meet the high demands by the process industry, where they predominantly are used for controlling the opening and closing process valves of which ball valves and butterfly valves are the most common types.

Angular Grippers Series CGA
Angular Grippers Series CGA

The angular grippers Series CGA, available in 5 different sizes, open and close at angles between -10° and +30°. The proximity switches can be inserted in the U-shaped grooves on the body. Grippers Series CGA have mounting holes on three sides which provide flexibility in installation.

180 ° Angular Grippers Series CGSN
180 ° Angular Grippers Series CGSN

The grippers Series CGSN are available in 4 different sizes and their fingers open 180° in order to enable the gripper to free the working area. In this way it is possible to reduce the number of movements in a working sequence. A link mechanism provides high gripping force. Proximity switches can be inserted in the grooves on the body.

Parallel Grippers Series CGP
Parallel Grippers Series CGP

The parallel gripper mod. CGP is available in 5 different sizes. The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a higher gripping force. The gripper is equipped with ring bearings in the sliding section for higher durability. Gripper mod. CGP has mounting holes on three sides which provides flexibility in installation.

Series CGPT self-centering parallel grippers with T-guide
Series CGPT self-centering parallel grippers with T-guide

The parallel gripper mod. CGP is available in 5 different sizes. The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a higher gripping force. The gripper is equipped with ring bearings in the sliding section for higher durability. Gripper mod. CGP has mounting holes on three sides which provides flexibility in installation.

Series CGPS self-centering parallel grippers with double ball bearing guide
Series CGPS self-centering parallel grippers with double ball bearing guide

The parallel gripper mod. CGP is available in 5 different sizes. The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a higher gripping force. The gripper is equipped with ring bearings in the sliding section for higher durability. Gripper mod. CGP has mounting holes on three sides which provides flexibility in installation.

Wide Opening Parallel Grippers Series CGLN
Wide Opening Parallel Grippers Series CGLN

The wide opening parallel gripper mod. CGL is available in 5 different sizes and has a compact design with a high gripping force and exists in five diameters with three different strokes. The high gripping force is obtained by means of a double piston mechanism and the fingers are synchronized by a rack and pinion mechanism.

3- Finger Centric Grippers Series CGC
3- Finger Centric Grippers Series CGC

The 3-finger centric gripper Mod. CGC is available in 5 different sizes. Significant for Mod. CGC is the compact design that allows the combination of a high gripping force and long stroke. The piston is equipped with permanent magnet for the use of magnetic proximity switches mod. CSB.

Series RPGA sprue grippers Size 20mm
Series RPGA sprue grippers Size 20mm

Thanks to a piston with a size of 20mm and to the direct transfer of the force from the piston to the fingers, Series RPGA guarantees a strong and a safe grip.

Series RPGB sprue grippers Size 8, 12mm
Series RPGB sprue grippers Size 8, 12mm

The external design, the choice of materials and the search for miniaturization makes Series RPGB a compact and lightweight solution.
The D model is provided with a finger having a slot for the installation of a magnetic sensor which is able to detect the grip of the piece.