Flow Control Valves & Accessories


Banjo Flow Control Valves SCU-MCU-SVU-MVU-SCO-MCO-BSP
Banjo Flow Control Valves SCU-MCU-SVU-MVU-SCO-MCO-BSP

Unidirectional and bidirectional flow control valves
Banjo flow control regulators
Ports M5, G1/8, G1/4, G3/8, G1/2

These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders.
The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube.
Only the G1/2 model is supplied complete with banjo flow controllers.
For the other models the banjo and flow controller is to be requested separately.

 

 

 

Compact Flow Control Valves PSCU-PMCU-PSVU-PMVU-PSCO-PMCO-BSP
Compact Flow Control Valves PSCU-PMCU-PSVU-PMVU-PSCO-PMCO-BSP

Unidirectional and bidirectional flow regulators with ports M5, G1/8, G1/4, G3/8 and with banjo in brass (port M5) or in technopolymer (ports G1/8, G1/4, G3/8)

These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube.  All models are supplied complete with banjo flow controllers.

Composite Right Angle Flow Control Valves TMCU-TMVU-TMCO-BSP
Composite Right Angle Flow Control Valves TMCU-TMVU-TMCO-BSP

Meter In, Meter Out, Needle Orifice G1/8, G1/4, G3/8, G1/2
Banjo flow controllers
Nominal diameters Ø 2 - 3.8 - 5.8 - 8 mm

The Meter In, Meter Out, Needle Orifice flow controllers, series TMCU, TMVU, TMCO have been designed to offer a solution with reduced overall dimensions in combination with higher flow rate characteristics.
Their construction allows an easy assembly on cylinders and valves and offers the possibility of locking the regulation screw once it has been set.
The flow regulation range which is extremely wide and gradual has been optimized further, allowing a very accurate flow regulation over the whole scale.

 

Needle Valves Series 28
Needle Valves Series 28

Bidirectional flow control valves
Ports G1/8, G1/4, G3/8, G1/2

These are bidirectional control valves made entirely of nickel-plated brass, with NBR seals and a technopolymer control knob.
They are suitable for regulating compressed air, water or mineral oil.
For models 2810, 2820, 2819 and 2829 exists the possibility to connect plastic, brass or copper tubes, using nut Mod. 1303 and cushion sleeve Mod. 1310/1320.

Right Angle Flow Control Valves GSCU-GMCU-GSVU-GMVU-GSCO-GMCO-BSP
Right Angle Flow Control Valves GSCU-GMCU-GSVU-GMVU-GSCO-GMCO-BSP

Unidirectional and bidirectional flow control valves
Banjo flow controllers nominal diameters 1,5 - 3,5 - 5 mm
Ports M5, G1/8 and G1/4

These unidirectional and bidirectional flow controllers have been designed as small as possible to enable mounting directly on valves or cylinders.
The flow regulation range is wide and gradual, allowing the regulation to be very accurate either at minimum or maximum flow.