Individual Fieldbus node - Series CX2


March 04 2011

Individual Fieldbus node


The new Individual Fieldbus node Series CX2

Industrial applications for valve islands using a Fieldbus Protocol connection are increasing, utilising the advantages in implementation and ease of wiring. To respond to this increasing market demand, Camozzi has developed a new serial node enabling some solenoid valves series to interface with the most widespread Fieldbus Protocols: Profibus-Dp; CANOpen and DeviceNet.


Maximum flexibility in use

The possibility to use the serial nodes directly integrated on different series of valves or as external components. Flexibility is increased by the modular structure. This device allows the connection of up to a max of 64 solenoids and 64 inputs on the base unit, so applications other than pneumatics are a possibility.

> Maximum flexibility in use
> For use in arduous conditions
> Easily modifiable

Wide range of modules

Electric output modules that can be coupled are: connection D-Sub- 37 pin for 8; 16; 24; 32 outlets or with two M12 connections for 4 outlets. Input modules have 8 M8 connections and allow the connection of sensors rated up to a max of 100mA.

High resistance

Thanks to its Aluminium support structure, this solution is IP65 rated with high mechanical strength. It is therefore suitable for mounting in arduous conditions. Easily modifiable, because all communication modules are connected by plug and socket, and addressing is done by rotary switch. It is also competitively priced.

Link Catalogue